From 8ff3b3ceb168f0d19cbb00a1b463c3efab574abf Mon Sep 17 00:00:00 2001
From: bananeweizen <bananeweizen>
Date: Thu, 19 Jan 2006 20:22:00 +0000
Subject: [PATCH 1/1] integration of cia.navi.cx

---
 CVSROOT/checkoutlist  |    4 +
 CVSROOT/ciabot_cvs.pl |  350 +++++++++++++++++++++++++++++++++++++++++++++++++
 CVSROOT/loginfo       |    3 +
 3 files changed, 357 insertions(+), 0 deletions(-)
 create mode 100644 CVSROOT/ciabot_cvs.pl

diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist
index b04b350..994fcdd 100644
--- a/CVSROOT/checkoutlist
+++ b/CVSROOT/checkoutlist
@@ -11,3 +11,7 @@
 #	[<whitespace>]<filename><whitespace><error message><end-of-line>
 #
 # comment lines begin with '#'
+#
+#
+# bot for cia.navi.cx
+ciabot_cvs.pl
\ No newline at end of file
diff --git a/CVSROOT/ciabot_cvs.pl b/CVSROOT/ciabot_cvs.pl
new file mode 100644
index 0000000..7d7630e
--- /dev/null
+++ b/CVSROOT/ciabot_cvs.pl
@@ -0,0 +1,350 @@
+#!/usr/bin/perl -w
+#
+# ciabot -- Mail a CVS log message to a given address, for the purposes of CIA
+#
+# Loosely based on cvslog by Russ Allbery <rra@stanford.edu>
+# Copyright 1998  Board of Trustees, Leland Stanford Jr. University
+#
+# Copyright 2001, 2003, 2004  Petr Baudis <pasky@ucw.cz>
+#
+# This program is free software; you can redistribute it and/or modify it under
+# the terms of the GNU General Public License version 2, as published by the
+# Free Software Foundation.
+#
+# The master location of this file is
+#   http://pasky.or.cz/~pasky/dev/cvs/ciabot.pl.
+#
+# This version has been modified a bit, and is available on CIA's web site:
+#   http://cia.navi.cx/clients/cvs/ciabot_cvs.pl
+#
+# This program is designed to run from the loginfo CVS administration file. It
+# takes a log message, massaging it and mailing it to the address given below.
+#
+# Its record in the loginfo file should look like:
+#
+#     ALL /usr/bin/perl $CVSROOT/CVSROOT/ciabot_cvs.pl %{,,,s} $USER project from_email dest_email ignore_regexp
+#
+# IMPORTANT: The %{,,,s} in loginfo is new, and is required for proper operation.
+#
+#            Make sure that you add the script to 'checkoutlist' before
+#            committing it. You may need to change /usr/bin/perl to point to your
+#            system's perl binary.
+#
+#            Note that the last four parameters are optional, you can alternatively
+#            change the defaults below in the configuration section.
+#
+
+use strict;
+use vars qw ($project $from_email $dest_email $rpc_uri $sendmail $sync_delay
+		$xml_rpc $ignore_regexp $alt_local_message_target);
+
+
+### Configuration
+
+# Project name (as known to CIA).
+#
+# NOTE: This shouldn't be a long description of your project. Ideally
+#       it is a short identifier with no spaces, punctuation, or
+#       unnecessary capitalization. This will be used in URLs related
+#       to your project, as an internal identifier, and in IRC messages.
+#       If you want a longer name shown for your project on the web
+#       interface, please use the "title" metadata key rather than
+#       putting that here.
+#
+$project = 'phpeclipse';
+
+# The from address in generated mails.
+$from_email = 'bananeweizen@sourceforge.net';
+
+# Mail all reports to this address.
+$dest_email = 'cia@cia.navi.cx';
+
+# If using XML-RPC, connect to this URI.
+$rpc_uri = 'http://cia.navi.cx/RPC2';
+
+# Path to your USCD sendmail compatible binary (your mailer daemon created this
+# program somewhere).
+$sendmail = '/usr/sbin/sendmail';
+
+# Number of seconds to wait for possible concurrent instances. CVS calls up
+# this script for each involved directory separately and this is the sync
+# delay. 5s looks as a safe value, but feel free to increase if you are running
+# this on a slower (or overloaded) machine or if you have really a lot of
+# directories.
+# Increasing this could be a very good idea if you're on Sourceforge ;)
+$sync_delay = 5;
+
+# This script can communicate with CIA either by mail or by an XML-RPC
+# interface. The XML-RPC interface is faster and more efficient, however you
+# need to have RPC::XML perl module installed, and some large CVS hosting sites
+# (like Savannah or Sourceforge) might not allow outgoing HTTP connections
+# while they allow outgoing mail. Also, this script will hang and eventually
+# not deliver the event at all if CIA server happens to be down, which is
+# unfortunately not an uncommon condition.
+$xml_rpc = 0;
+
+# You can make this bot to totally ignore events concerning the objects
+# specified below. Each object is composed of <module>/<path>/<filename>,
+# therefore file Manifest in root directory of module gentoo will be called
+# "gentoo/Manifest", while file src/bfu/inphist.c of module elinks will be
+# called "elinks/src/bfu/inphist.c". Easy, isn't it?
+#
+# This variable should contain regexp, against which will each object be
+# checked, and if the regexp is matched, the file is ignored. Therefore ie.  to
+# ignore all changes in the two files above and everything concerning module
+# 'admin', use:
+#
+# $ignore_regexp = "^(gentoo/Manifest|elinks/src/bfu/inphist.c|admin/)";
+$ignore_regexp = "";
+
+# It can be useful to also grab the generated XML message by some other
+# programs and ie. autogenerate some content based on it. Here you can specify
+# a file to which it will be appended.
+$alt_local_message_target = "";
+
+
+
+
+### The code itself
+
+use vars qw ($user $module $tag @files $logmsg $message);
+
+my @dir; # This array stores all the affected directories
+my @dirfiles;  # This array is mapped to the @dir array and contains files
+               # affected in each directory
+
+
+# A nice nonprinting character we can use as a separator relatively safely.
+# The commas in loginfo above give us 4 commas and a space between file
+# names given to us on the command line. This is the separator used internally.
+# Now we can handle filenames containing spaces, and probably anything except
+# strings of 4 commas or the ASCII bell character.
+#
+# This was inspired by the suggestion in:
+#  http://mail.gnu.org/archive/html/info-cvs/2003-04/msg00267.html
+#
+$" = "\7";
+
+### Input data loading
+
+
+# These arguments are from %s; first the relative path in the repository
+# and then the list of files modified.
+
+@files = split (' ,,,', ($ARGV[0] or ''));
+$dir[0] = shift @files or die "$0: no directory specified\n";
+$dirfiles[0] = "@files" or die "$0: no files specified\n";
+
+
+# Guess module name.
+
+$module = $dir[0]; $module =~ s#/.*##;
+
+
+# Figure out who is doing the update.
+
+$user = $ARGV[1];
+
+
+# Use the optional parameters, if supplied.
+
+$project = $ARGV[2] if $ARGV[2];
+$from_email = $ARGV[3] if $ARGV[3];
+$dest_email = $ARGV[4] if $ARGV[4];
+$ignore_regexp = $ARGV[5] if $ARGV[5];
+
+
+# Parse stdin (what's interesting is the tag and log message)
+
+while (<STDIN>) {
+  $tag = $1 if /^\s*Tag: ([a-zA-Z0-9_-]+)/;
+  last if /^Log Message/;
+}
+
+$logmsg = "";
+while (<STDIN>) {
+  next unless ($_ and $_ ne "\n" and $_ ne "\r\n");
+  s/&/&amp;/g;
+  s/</&lt;/g;
+  s/>/&gt;/g;
+  $logmsg .= $_;
+}
+
+### Remove to-be-ignored files
+
+$dirfiles[0] = join (' ',
+  grep {
+    my $f = "$dir[0]/$_";
+    $f !~ m/$ignore_regexp/;
+  } split (/\s+/, $dirfiles[0])
+) if ($ignore_regexp);
+exit unless $dirfiles[0];
+
+
+
+### Sync between the multiple instances potentially being ran simultanously
+
+my $sum; # _VERY_ simple hash of the log message. It is really weak, but I'm
+         # lazy and it's really sorta exceptional to even get more commits
+         # running simultanously anyway.
+$sum = 0;
+map { $sum += ord $_ } split(//, $logmsg);
+
+my $syncfile; # Name of the file used for syncing
+$syncfile = "/tmp/cvscia.$project.$module.$sum";
+
+
+if (-f $syncfile and -w $syncfile) {
+  # The synchronization file for this file already exists, so we are not the
+  # first ones. So let's just dump what we know and exit.
+
+  open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!";
+  print FF "$dirfiles[0]!@!$dir[0]\n";
+  close(FF);
+  exit;
+
+} else {
+  # We are the first one! Thus, we'll fork, exit the original instance, and
+  # wait a bit with the new one. Then we'll grab what the others collected and
+  # go on.
+
+  # We don't need to care about permissions since all the instances of the one
+  # commit will obviously live as the same user.
+
+  # system("touch") in a different way
+  open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!";
+  close(FF);
+
+  exit if (fork);
+  sleep($sync_delay);
+
+  open(FF, $syncfile);
+  my ($dirnum) = 1; # 0 is the one we got triggerred for
+  while (<FF>) {
+    chomp;
+    ($dirfiles[$dirnum], $dir[$dirnum]) = split(/!@!/);
+    $dirnum++;
+  }
+  close(FF);
+
+  unlink($syncfile);
+}
+
+
+
+### Compose the mail message
+
+
+my ($VERSION) = '2.4';
+my ($URL) = 'http://cia.navi.cx/clients/cvs/ciabot_cvs.pl';
+my $ts = time;
+
+$message = <<EM
+<message>
+   <generator>
+       <name>CIA Perl client for CVS</name>
+       <version>$VERSION</version>
+       <url>$URL</url>
+   </generator>
+   <source>
+       <project>$project</project>
+       <module>$module</module>
+EM
+;
+$message .= "       <branch>$tag</branch>" if ($tag);
+$message .= <<EM
+   </source>
+   <timestamp>
+       $ts
+   </timestamp>
+   <body>
+       <commit>
+           <author>$user</author>
+           <files>
+EM
+;
+
+for (my $dirnum = 0; $dirnum < @dir; $dirnum++) {
+  map {
+    $_ = $dir[$dirnum] . '/' . $_;
+    s#^.*?/##; # weed out the module name
+    s/&/&amp;/g;
+    s/</&lt;/g;
+    s/>/&gt;/g;
+    $message .= "  <file>$_</file>\n";
+  } split($", $dirfiles[$dirnum]);
+}
+
+$message .= <<EM
+           </files>
+           <log>
+$logmsg
+           </log>
+       </commit>
+   </body>
+</message>
+EM
+;
+
+
+
+### Write the message to an alt-target
+
+if ($alt_local_message_target and open (ALT, ">>$alt_local_message_target")) {
+  print ALT $message;
+  close ALT;
+}
+
+
+
+### Send out the XML-RPC message
+
+
+if ($xml_rpc) {
+  # We gotta be careful from now on. We silence all the warnings because
+  # RPC::XML code is crappy and works with undefs etc.
+  $^W = 0;
+  $RPC::XML::ERROR if (0); # silence perl's compile-time warning
+
+  require RPC::XML;
+  require RPC::XML::Client;
+
+  my $rpc_client = new RPC::XML::Client $rpc_uri;
+  my $rpc_request = RPC::XML::request->new('hub.deliver', $message);
+  my $rpc_response = $rpc_client->send_request($rpc_request);
+
+  unless (ref $rpc_response) {
+    die "XML-RPC Error: $RPC::XML::ERROR\n";
+  }
+  exit;
+}
+
+
+
+### Send out the mail
+
+
+# Open our mail program
+
+open (MAIL, "| $sendmail -t -oi -oem") or die "Cannot execute $sendmail : " . ($?>>8);
+
+
+# The mail header
+
+print MAIL <<EOM;
+From: $from_email
+To: $dest_email
+Content-type: text/xml
+Subject: DeliverXML
+
+EOM
+
+print MAIL $message;
+
+
+# Close the mail
+
+close MAIL;
+die "$0: sendmail exit status " . ($? >> 8) . "\n" unless ($? == 0);
+
+# vi: set sw=2:
diff --git a/CVSROOT/loginfo b/CVSROOT/loginfo
index ead100d..02c720a 100644
--- a/CVSROOT/loginfo
+++ b/CVSROOT/loginfo
@@ -25,3 +25,6 @@
 # or
 #DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
 DEFAULT /cvsroot/sitedocs/CVSROOT/cvstools/syncmail %{sVv} phpeclipse-commits@lists.sourceforge.net
+#
+# cia.navi.cx
+ALL /usr/bin/perl $CVSROOT/CVSROOT/ciabot_cvs.pl %{,,,s} $USER
\ No newline at end of file
-- 
1.7.1