From: Edward Mann Date: Mon, 23 Feb 2009 18:13:01 +0000 (+0000) Subject: Updating syntax.xml to attempt fix issues reported in ticket #761 X-Git-Url: http://secure.phpeclipse.com Updating syntax.xml to attempt fix issues reported in ticket #761 addresses #761 --- diff --git a/net.sourceforge.phpeclipse/src/net/sourceforge/phpeclipse/phpeditor/syntax.xml b/net.sourceforge.phpeclipse/src/net/sourceforge/phpeclipse/phpeditor/syntax.xml index fc39beb..6eef0eb 100644 --- a/net.sourceforge.phpeclipse/src/net/sourceforge/phpeclipse/phpeditor/syntax.xml +++ b/net.sourceforge.phpeclipse/src/net/sourceforge/phpeclipse/phpeditor/syntax.xml @@ -2880,9 +2880,9 @@ - + @@ -2895,7 +2895,6 @@ - @@ -2903,10 +2902,20 @@ + + + + + + + + + + @@ -2918,1565 +2927,6 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -1 -2 - - - - - - - - - - - - - - - - - - - - - - - - - -MQCC_OK -MQCC_WARNING -MQCC_FAILED -MQCC_UNKNOWN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -The default transaction settings are to be used. This default is determined by the client library, which defines it as IBASE_WRITE|IBASE_CONCURRENCY|IBASE_WAIT in most cases. -Starts a read-only transaction. -Starts a read-write transaction. -Starts a transaction with the isolation level set to 'consistency', which means the transaction cannot read from tables that are being modified by other concurrent transactions. -Starts a transaction with the isolation level set to 'concurrency' (or 'snapshot'), which means the transaction has access to all tables, but cannot see changes that were committed by other transactions after the transaction was started. -Starts a transaction with the isolation level set to 'read committed'. This flag should be combined with either IBASE_REC_VERSION or IBASE_REC_NO_VERSION . This isolation level allows access to changes that were committed after the transaction was started. If IBASE_REC_NO_VERSION was specified, only the latest version of a row can be read. If IBASE_REC_VERSION was specified, a row can even be read when a modification to it is pending in a concurrent transaction. -Indicated that a transaction should wait and retry when a conflict occurs. -Indicated that a transaction should fail immediately when a conflict occurs. -Also available as IBASE_TEXT for backward compatibility. Causes BLOB contents to be fetched inline, instead of being fetched as BLOB identifiers. -Causes arrays to be fetched inline. Otherwise, array identifiers are returned. Array identifiers can only be used as arguments to INSERT operations, as no functions to handle array identifiers are currently available. -Causes date and time fields not to be returned as strings, but as UNIX timestamps (the number of seconds since the epoch, which is 1-Jan-1970 0:00 UTC). Might be problematic if used with dates before 1970 on some systems. - - - - - - - - - - - - - - - - - - - - - - - - - - -string -string -integer -integer - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Use compression protocol -Allow space after function names -Allow interactive_timeout seconds (instead of wait_timeout) of inactivity before closing the connection. -Use SSL encryption. This flag is only available with version 4.x of the MySQL client library or newer. Version 3.23.x is bundled both with PHP 4 and Windows binaries of PHP 5. -Columns are returned into the array having the fieldname as the array index. -Columns are returned into the array having both a numerical index and the fieldname as the array index. -Columns are returned into the array having a numerical index to the fields. This index starts with 0, the first field in the result. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Adds text/plain content type headers to encrypted/signed message. If decrypting or verifying, it strips those headers from the output - if the decrypted or verified message is not of MIME type text/plain then an error will occur. -Normally the input message is converted to "canonical" format which is effectively using CR and LF as end of line: as required by the S/MIME specification. When this options is present, no translation occurs. This is useful when handling binary data which may not be in MIME format. -When verifying a message, certificates (if any) included in the message are normally searched for the signing certificate. With this option only the certificates specified in the extracerts parameter of openssl_pkcs7_verify are used. The supplied certificates can still be used as untrusted CAs however. -Do not verify the signers certificate of a signed message. -Do not chain verification of signers certificates: that is don't use the certificates in the signed message as untrusted CAs. -When signing a message the signer's certificate is normally included - with this option it is excluded. This will reduce the size of the signed message but the verifier must have a copy of the signers certificate available locally (passed using the extracerts to openssl_pkcs7_verify for example). -Normally when a message is signed, a set of attributes are included which include the signing time and the supported symmetric algorithms. With this option they are not included. -When signing a message, use cleartext signing with the MIME type multipart/signed. This is the default if you do not specify any flags to openssl_pkcs7_sign . If you turn this option off, the message will be signed using opaque signing, which is more resistant to translation by mail relays but cannot be read by mail agents that do not support S/MIME. -Don't try and verify the signatures on a message - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Used with stream_filter_append and stream_filter_prepend to indicate that the specified filter should only be applied when reading -Used with stream_filter_append and stream_filter_prepend to indicate that the specified filter should only be applied when writing -This constant is equivalent to STREAM_FILTER_READ | STREAM_FILTER_WRITE -Return Code indicating that the userspace filter returned buckets in $out . -Return Code indicating that the userspace filter did not return buckets in $out (i.e. No data available). -Return Code indicating that the userspace filter encountered an unrecoverable error (i.e. Invalid data received). -Flag indicating if the stream used the include path. -Flag indicating if the wrapper is responsible for raising errors using trigger_error during opening of the stream. If this flag is not set, you should not raise any errors. -Open client socket asynchronously. This option must be used together with the STREAM_CLIENT_CONNECT flag. Used with stream_socket_client . -Open client socket connection. Client sockets should always include this flag. Used with stream_socket_client . -Client socket opened with stream_socket_client should remain persistent between page loads. -Tells a stream created with stream_socket_server to bind to the specified target. Server sockets should always include this flag. -Tells a stream created with stream_socket_server and bound using the STREAM_SERVER_BIND flag to start listening on the socket. Connection-orientated transports (such as TCP) must use this flag, otherwise the server socket will not be enabled. Using this flag for connect-less transports (such as UDP) is an error. -A remote address required for this stream has been resolved, or the resolution failed. See severity for an indication of which happened. -A connection with an external resource has been established. -Additional authorization is required to access the specified resource. Typical issued with severity level of STREAM_NOTIFY_SEVERITY_ERR . -The mime-type of resource has been identified, refer to message for a description of the discovered type. -The size of the resource has been discovered. -The external resource has redirected the stream to an alternate location. Refer to message . -Indicates current progress of the stream transfer in bytes_transferred and possibly bytes_max as well. -There is no more data available on the stream. -A generic error occurred on the stream, consult message and message_code for details. -Authorization has been completed (with or without success). -Normal, non-error related, notification. -Non critical error condition. Processing may continue. -A critical error occurred. Processing cannot continue. -Provides a ICMP socket. -Provides a IP socket. -Provides a RAW socket. -Provides a TCP socket. -Provides a UDP socket. -Internet Protocol Version 4 (IPv4). -Internet Protocol Version 6 (IPv6). -Unix system internal protocols. -Provides datagrams, which are connectionless messages (UDP, for example). -Provides a raw socket, which provides access to internal network protocols and interfaces. Usually this type of socket is just available to the root user. -Provides a RDM (Reliably-delivered messages) socket. -Provides a sequenced packet stream socket. -Provides sequenced, two-way byte streams with a transmission mechanism for out-of-band data (TCP, for example). -Used with stream_socket_shutdown to disable further receptions. Added in PHP 5.2.1. -Used with stream_socket_shutdown to disable further transmissions. Added in PHP 5.2.1. -Used with stream_socket_shutdown to disable further receptions and transmissions. Added in PHP 5.2.1. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Phar::SHA512 ( integer ) -Phar::PHPS ( integer ) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Some value which can be obtained with fstat(1) changed for a file or directory. -A file or directory was deleted or renamed. -A file was created in a directory. -This event never occurs. -An event in response to fam_cancel_monitor . -An event upon request to monitor a file or directory. When a directory is monitored, an event for that directory and every file contained in that directory is issued. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Used to turn on-the-fly data compression on with Memcache::set , Memcache::add &listendand; Memcache::replace . -1 if this Memcache session handler is available, 0 otherwise. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -integer -integer -integer -integer -integer 3.14159265358979323846 2.7182818284590452354 1.4426950408889634074 @@ -4494,124 +2944,10 @@ 0.70710678118654752440 1.14472988584940017414 0.57721566490153286061 - - -The component name used to initialise the SQLDBC runtime environment. -The application to be connected to the database. -The version of the application. -The SQL mode. -TRUE, if the connection is an unicode (UCS2) client or FALSE, if not. -The maximum allowed time of inactivity after which the connection to the database is closed by the system. -Specifies whether and how shared locks and exclusive locks are implicitly requested or released. -The number of different request packets used for the connection. -The number of prepared statements to be cached for the connection for re-use. -The prefix to use for result tables that are automatically named. -Columns are returned into the array having the fieldname as the array index. -Columns are returned into the array having the upper case fieldname as the array index. -Columns are returned into the array having the lower case fieldname as the array index. -Columns are returned into the array having both a numerical index and the fieldname as the array index. -Columns are returned into the array having a numerical index to the fields. This index starts with 0, the first field in the result. -ERR_NOERR -ERR_DUPLICATE -ERR_EOSCAN -ERR_EMPTY -ERR_CLOSE -ERR_WLOCKED -ERR_LOCKED -ERR_NOLOCK -ERR_READ -ERR_WRITE -ERR_CREATE -ERR_LSEEK -ERR_LENGTH -ERR_OPEN -ERR_WOPEN -ERR_MAGIC -ERR_VERSION -ERR_PGSIZE -ERR_CRC -ERR_PIPE -ERR_NIDX -ERR_MALLOC -ERR_NUSERS -ERR_PREEXIT -ERR_ONTRAP -ERR_PREPROC -ERR_DBPARSE -ERR_DBRUNERR -ERR_DBPREEXIT -ERR_WAIT -ERR_CORRUPT_TUPLE -ERR_WARNING0 -ERR_PANIC -ERR_FIFO -ERR_PERM -ERR_TCL -ERR_RESTRICTED -ERR_USER -ERR_UNKNOWN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - +1 +2 +3 +4 @@ -4722,288 +3058,6 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Character data with fixed length -Date, number of days since 1.1.0000 -Short integer (2 Bytes) -Long integer (4 Bytes) -same as PX_FIELD_NUMBER -Double -Boolean -Binary large object -Binary large object (not supported) -Binary large object -OLE object (basically a blob, not supported) -Graphic (basically a blob, not supported) -time, number of milli seconds since midnight -timestamp, number of milli seconds since 1.1.0000 -Auto incrementing interger (like PX_FIELD_LONG) -Decimal number stored in bcd format (not supported) -Array of Bytes with not more than 255 bytes (not supported) -Turn all field names into lower case -Turn all field names into upper case -Indexed database -Primary index -None indexed database -None incremental secondary index -Secondary index -Incremental secondary index -Non incremental secondary index -Secondary index -Non incremental secondary index -Unsigned 8-bit PCM. -Signed 8-bit PCM. -Unsigned 16-bit PCM. Little Endian byte order. -Unsigned 16-bit PCM. Big Endian byte order. -Signed 16-bit PCM. Little Endian byte order. -Signed 16-bit PCM. Big Endian byte order. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Orders results so that $matches[0] is an array of full pattern matches, $matches[1] is an array of strings matched by the first parenthesized subpattern, and so on. This flag is only used with preg_match_all . -Orders results so that $matches[0] is an array of first set of matches, $matches[1] is an array of second set of matches, and so on. This flag is only used with preg_match_all . -See the description of PREG_SPLIT_OFFSET_CAPTURE . This flag is available since PHP 4.3.0. -This flag tells preg_split to return only non-empty pieces. -This flag tells preg_split to capture parenthesized expression in the delimiter pattern as well. This flag is available since PHP 4.0.5. -If this flag is set, for every occurring match the appendant string offset will also be returned. Note that this changes the return values in an array where every element is an array consisting of the matched string at offset 0 and its string offset within subject at offset 1. This flag is available since PHP 4.3.0 and is only used for preg_split . -Returned by preg_last_error if there were no errors. Available since PHP 5.2.0. -Returned by preg_last_error if there was an internal PCRE error. Available since PHP 5.2.0. -Returned by preg_last_error if <link linkend="ini.pcre.backtrack-limit">backtrack limit was exhausted. Available since PHP 5.2.0. -Returned by preg_last_error if <link linkend="ini.pcre.recursion-limit">recursion limit was exhausted. Available since PHP 5.2.0. -Returned by preg_last_error if the last error was caused by malformed UTF-8 data (only when running a regex in <link linkend="reference.pcre.pattern.modifiers">UTF-8 mode ). Available since PHP 5.2.0. -Returned by preg_last_error if the offset didn't correspond to the begin of a valid UTF-8 code point (only when running a regex in UTF-8 mode ). Available since PHP 5.3.0. -PCRE version and release date (e.g. "7.0 18-Dec-2006"). Available since PHP 5.2.4. - - - - - - - - - - -KRB5_KDB_DISALLOW_FORWARDABLE -KRB5_KDB_DISALLOW_RENEWABLE -KRB5_KDB_DISALLOW_DUP_SKEY -KRB5_KDB_REQUIRES_PRE_AUTH -KRB5_KDB_REQUIRES_PWCHANGE -KRB5_KDB_PWCHANGE_SERVER -KRB5_KDB_NEW_PRINC -long -long -long -long -long -long -string -long -long -string -long -long -long -long -long -long - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -5159,97 +3213,755 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 -2 -4 -8 -16 -32 -64 --1 -1 -2 -4 -8 -16 -32 -64 --1 - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 +4 +5 +6 +9 +255 +254 +-1 + +1 +2 +3 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Adds text/plain content type headers to encrypted/signed message. If decrypting or verifying, it strips those headers from the output - if the decrypted or verified message is not of MIME type text/plain then an error will occur. +Normally the input message is converted to "canonical" format which is effectively using CR and LF as end of line: as required by the S/MIME specification. When this options is present, no translation occurs. This is useful when handling binary data which may not be in MIME format. +When verifying a message, certificates (if any) included in the message are normally searched for the signing certificate. With this option only the certificates specified in the extracerts parameter of openssl_pkcs7_verify are used. The supplied certificates can still be used as untrusted CAs however. +Do not verify the signers certificate of a signed message. +Do not chain verification of signers certificates: that is don't use the certificates in the signed message as untrusted CAs. +When signing a message the signer's certificate is normally included - with this option it is excluded. This will reduce the size of the signed message but the verifier must have a copy of the signers certificate available locally (passed using the extracerts to openssl_pkcs7_verify for example). +Normally when a message is signed, a set of attributes are included which include the signing time and the supported symmetric algorithms. With this option they are not included. +When signing a message, use cleartext signing with the MIME type multipart/signed. This is the default if you do not specify any flags to openssl_pkcs7_sign . If you turn this option off, the message will be signed using opaque signing, which is more resistant to translation by mail relays but cannot be read by mail agents that do not support S/MIME. +Don't try and verify the signatures on a message + + + + + +Phar::SHA512 ( integer ) +Phar::PHPS ( integer ) + + + + + + + + + + + + + + + +ERR_NOERR +ERR_DUPLICATE +ERR_EOSCAN +ERR_EMPTY +ERR_CLOSE +ERR_WLOCKED +ERR_LOCKED +ERR_NOLOCK +ERR_READ +ERR_WRITE +ERR_CREATE +ERR_LSEEK +ERR_LENGTH +ERR_OPEN +ERR_WOPEN +ERR_MAGIC +ERR_VERSION +ERR_PGSIZE +ERR_CRC +ERR_PIPE +ERR_NIDX +ERR_MALLOC +ERR_NUSERS +ERR_PREEXIT +ERR_ONTRAP +ERR_PREPROC +ERR_DBPARSE +ERR_DBRUNERR +ERR_DBPREEXIT +ERR_WAIT +ERR_CORRUPT_TUPLE +ERR_WARNING0 +ERR_PANIC +ERR_FIFO +ERR_PERM +ERR_TCL +ERR_RESTRICTED +ERR_USER +ERR_UNKNOWN + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 +13 +14 +15 +16 +17 +18 +1 +2 +3 +4 +5 +7 +8 +9 +10 +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 +13 +14 +15 +16 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Used to turn on-the-fly data compression on with Memcache::set , Memcache::add &listendand; Memcache::replace . +1 if this Memcache session handler is available, 0 otherwise. + + + + + + + + + + + + + + + + + + +Used with stream_filter_append and stream_filter_prepend to indicate that the specified filter should only be applied when reading +Used with stream_filter_append and stream_filter_prepend to indicate that the specified filter should only be applied when writing +This constant is equivalent to STREAM_FILTER_READ | STREAM_FILTER_WRITE +Return Code indicating that the userspace filter returned buckets in $out . +Return Code indicating that the userspace filter did not return buckets in $out (i.e. No data available). +Return Code indicating that the userspace filter encountered an unrecoverable error (i.e. Invalid data received). +Flag indicating if the stream used the include path. +Flag indicating if the wrapper is responsible for raising errors using trigger_error during opening of the stream. If this flag is not set, you should not raise any errors. +Open client socket asynchronously. This option must be used together with the STREAM_CLIENT_CONNECT flag. Used with stream_socket_client . +Open client socket connection. Client sockets should always include this flag. Used with stream_socket_client . +Client socket opened with stream_socket_client should remain persistent between page loads. +Tells a stream created with stream_socket_server to bind to the specified target. Server sockets should always include this flag. +Tells a stream created with stream_socket_server and bound using the STREAM_SERVER_BIND flag to start listening on the socket. Connection-orientated transports (such as TCP) must use this flag, otherwise the server socket will not be enabled. Using this flag for connect-less transports (such as UDP) is an error. +A remote address required for this stream has been resolved, or the resolution failed. See severity for an indication of which happened. +A connection with an external resource has been established. +Additional authorization is required to access the specified resource. Typical issued with severity level of STREAM_NOTIFY_SEVERITY_ERR . +The mime-type of resource has been identified, refer to message for a description of the discovered type. +The size of the resource has been discovered. +The external resource has redirected the stream to an alternate location. Refer to message . +Indicates current progress of the stream transfer in bytes_transferred and possibly bytes_max as well. +There is no more data available on the stream. +A generic error occurred on the stream, consult message and message_code for details. +Authorization has been completed (with or without success). +Normal, non-error related, notification. +Non critical error condition. Processing may continue. +A critical error occurred. Processing cannot continue. +Provides a ICMP socket. +Provides a IP socket. +Provides a RAW socket. +Provides a TCP socket. +Provides a UDP socket. +Internet Protocol Version 4 (IPv4). +Internet Protocol Version 6 (IPv6). +Unix system internal protocols. +Provides datagrams, which are connectionless messages (UDP, for example). +Provides a raw socket, which provides access to internal network protocols and interfaces. Usually this type of socket is just available to the root user. +Provides a RDM (Reliably-delivered messages) socket. +Provides a sequenced packet stream socket. +Provides sequenced, two-way byte streams with a transmission mechanism for out-of-band data (TCP, for example). +Used with stream_socket_shutdown to disable further receptions. Added in PHP 5.2.1. +Used with stream_socket_shutdown to disable further transmissions. Added in PHP 5.2.1. +Used with stream_socket_shutdown to disable further receptions and transmissions. Added in PHP 5.2.1. +Fatal run-time errors. These indicate errors that can not be recovered from, such as a memory allocation problem. Execution of the script is halted. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +no color (black) +white +red - supported when terminal is in color mode +green - supported when terminal is in color mode +yellow - supported when terminal is in color mode +blue - supported when terminal is in color mode +cyan - supported when terminal is in color mode +magenta - supported when terminal is in color mode +down arrow +up arrow +left arrow +right arrow +home key (upward+left arrow) +backspace +delete line +insert line +delete character +insert char or enter insert mode +exit insert char mode +clear screen +clear to end of screen +clear to end of line +scroll one line forward +scroll one line backward +next page +previous page +set tab +clear tab +clear all tabs +soft (partial) reset +reset or hard reset +print +lower left +upper left of keypad +upper right of keypad +center of keypad +lower left of keypad +lower right of keypad +back tab +beginning +cancel +close +cmd (command) +copy +create +end +exit +find +help +mark +message +move +next +open +options +previous +redo +ref (reference) +refresh +replace +restart +resume +save +shiftet beg (beginning) +shifted cancel +shifted command +shifted copy +shifted create +shifted delete char +shifted delete line +select +shifted end +shifted end of line +shifted exit +shifted find +shifted help +shifted home +shifted input +shifted left arrow +shifted message +shifted move +shifted next +shifted options +shifted previous +shifted print +shifted redo +shifted replace +shifted right arrow +shifted resume +shifted save +shifted suspend +undo +mouse event has occurred +maximum key value +ctrl pressed during click +shift pressed during click +alt pressed during click +report all mouse events +report mouse position @@ -5321,99 +4033,129 @@ - -1 -4 -5 -6 -9 -255 -254 --1 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Fatal run-time errors. These indicate errors that can not be recovered from, such as a memory allocation problem. Execution of the script is halted. - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + +1 +2 +3 +4 +5 +6 +7 +8 +9 +10 +11 +12 +1 +2 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -5429,7 +4171,8 @@ - + + @@ -5448,7 +4191,6 @@ - @@ -5477,279 +4219,146 @@ + + + + + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -hotkey defined by newt_form_add_hot_key was pressed -some component has caused form to exit -file descriptor specified in newt_form_watch_fd is ready to be read or written to -time specified in newt_form_set_timer has elapsed - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Exit form, when component is activated -Component is hidden -Component is scrollable -Component is disabled - -Wrap text -Don't exit form on pressing F12 - -Component is selected -Component is checkbox -Entry component is password entry -Show cursor - - - - - - - - - - - - - - -Wrap text in the textbox -Scroll text in the textbox -Don't exit form on F12 press - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + +The default transaction settings are to be used. This default is determined by the client library, which defines it as IBASE_WRITE|IBASE_CONCURRENCY|IBASE_WAIT in most cases. +Starts a read-only transaction. +Starts a read-write transaction. +Starts a transaction with the isolation level set to 'consistency', which means the transaction cannot read from tables that are being modified by other concurrent transactions. +Starts a transaction with the isolation level set to 'concurrency' (or 'snapshot'), which means the transaction has access to all tables, but cannot see changes that were committed by other transactions after the transaction was started. +Starts a transaction with the isolation level set to 'read committed'. This flag should be combined with either IBASE_REC_VERSION or IBASE_REC_NO_VERSION . This isolation level allows access to changes that were committed after the transaction was started. If IBASE_REC_NO_VERSION was specified, only the latest version of a row can be read. If IBASE_REC_VERSION was specified, a row can even be read when a modification to it is pending in a concurrent transaction. +Indicated that a transaction should wait and retry when a conflict occurs. +Indicated that a transaction should fail immediately when a conflict occurs. +Also available as IBASE_TEXT for backward compatibility. Causes BLOB contents to be fetched inline, instead of being fetched as BLOB identifiers. +Causes arrays to be fetched inline. Otherwise, array identifiers are returned. Array identifiers can only be used as arguments to INSERT operations, as no functions to handle array identifiers are currently available. +Causes date and time fields not to be returned as strings, but as UNIX timestamps (the number of seconds since the epoch, which is 1-Jan-1970 0:00 UTC). Might be problematic if used with dates before 1970 on some systems. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Unsigned 8-bit PCM. +Signed 8-bit PCM. +Unsigned 16-bit PCM. Little Endian byte order. +Unsigned 16-bit PCM. Big Endian byte order. +Signed 16-bit PCM. Little Endian byte order. +Signed 16-bit PCM. Big Endian byte order. @@ -5771,215 +4380,24 @@ -TIDY_TAG_A -TIDY_TAG_ACRONYM -TIDY_TAG_APPLET -TIDY_TAG_B -TIDY_TAG_BASEFONT -TIDY_TAG_BGSOUND -TIDY_TAG_BLINK -TIDY_TAG_BODY -TIDY_TAG_BUTTON -TIDY_TAG_CENTER -TIDY_TAG_CODE -TIDY_TAG_COLGROUP -TIDY_TAG_DD -TIDY_TAG_DFN -TIDY_TAG_DIV -TIDY_TAG_DT -TIDY_TAG_EMBED -TIDY_TAG_FONT -TIDY_TAG_FRAME -TIDY_TAG_H1 -TIDY_TAG_H3 -TIDY_TAG_H5 -TIDY_TAG_HEAD -TIDY_TAG_HTML -TIDY_TAG_IFRAME -TIDY_TAG_IMG -TIDY_TAG_INS -TIDY_TAG_KBD -TIDY_TAG_LABEL -TIDY_TAG_LEGEND -TIDY_TAG_LINK -TIDY_TAG_MAP -TIDY_TAG_MENU -TIDY_TAG_MULTICOL -TIDY_TAG_NOEMBED -TIDY_TAG_NOLAYER -TIDY_TAG_NOSCRIPT -TIDY_TAG_OL -TIDY_TAG_OPTION -TIDY_TAG_PARAM -TIDY_TAG_PRE -TIDY_TAG_RP -TIDY_TAG_RTC -TIDY_TAG_S -TIDY_TAG_SCRIPT -TIDY_TAG_SERVER -TIDY_TAG_SMALL -TIDY_TAG_SPAN -TIDY_TAG_STRONG -TIDY_TAG_SUB -TIDY_TAG_TBODY -TIDY_TAG_TEXTAREA -TIDY_TAG_TH -TIDY_TAG_TITLE -TIDY_TAG_TR -TIDY_TAG_U -TIDY_TAG_VAR -TIDY_TAG_XMP -TIDY_ATTR_ABBR -TIDY_ATTR_ACCEPT_CHARSET -TIDY_ATTR_ACTION -TIDY_ATTR_ALIGN -TIDY_ATTR_ALT -TIDY_ATTR_AXIS -TIDY_ATTR_BGCOLOR -TIDY_ATTR_BORDER -TIDY_ATTR_BOTTOMMARGIN -TIDY_ATTR_CELLSPACING -TIDY_ATTR_CHAROFF -TIDY_ATTR_CHECKED -TIDY_ATTR_CLASS -TIDY_ATTR_CLEAR -TIDY_ATTR_CODEBASE -TIDY_ATTR_COLOR -TIDY_ATTR_COLSPAN -TIDY_ATTR_CONTENT -TIDY_ATTR_DATA -TIDY_ATTR_DATAPAGESIZE -TIDY_ATTR_DATETIME -TIDY_ATTR_DEFER -TIDY_ATTR_DISABLED -TIDY_ATTR_ENCTYPE -TIDY_ATTR_FOR -TIDY_ATTR_FRAMEBORDER -TIDY_ATTR_GRIDX -TIDY_ATTR_HEADERS -TIDY_ATTR_HREF -TIDY_ATTR_HSPACE -TIDY_ATTR_ID -TIDY_ATTR_LABEL -TIDY_ATTR_LANGUAGE -TIDY_ATTR_LAST_VISIT -TIDY_ATTR_LINK -TIDY_ATTR_LOWSRC -TIDY_ATTR_MARGINWIDTH -TIDY_ATTR_MEDIA -TIDY_ATTR_MULTIPLE -TIDY_ATTR_NOHREF -TIDY_ATTR_NOSHADE -TIDY_ATTR_OBJECT -TIDY_ATTR_PROMPT -TIDY_ATTR_READONLY -TIDY_ATTR_REV -TIDY_ATTR_ROWS -TIDY_ATTR_RULES -TIDY_ATTR_SCOPE -TIDY_ATTR_SELECTED -TIDY_ATTR_SHOWGRID -TIDY_ATTR_SHOWGRIDY -TIDY_ATTR_SPAN -TIDY_ATTR_STANDBY -TIDY_ATTR_STYLE -TIDY_ATTR_TABINDEX -TIDY_ATTR_TEXT -TIDY_ATTR_TOPMARGIN -TIDY_ATTR_USEMAP -TIDY_ATTR_VALUE -TIDY_ATTR_VERSION -TIDY_ATTR_VSPACE -TIDY_ATTR_WRAP -TIDY_ATTR_XML_SPACE -constant -root node -doctype -HTML comment -Processing Instruction -Text -start tag -end tag -empty tag -CDATA -XML section -ASP code -JSTE code -PHP code -XML declaration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + if there is an error while sending data to the system logger, write directly to the system console open the connection to the logger immediately (default) delay opening the connection until the first message is logged @@ -6016,176 +4434,117 @@ Any Resource Record. On most systems this returns all resource records, however it should not be counted upon for critical uses. Try DNS_ALL instead. IPv6 Address Resource Iteratively query the name server for each available record type. - - - - - - - - - - - - -1 -2 -4 -8 -16 -32 -64 -128 -256 -example: 1.0.2-dev -no color (black) -white -red - supported when terminal is in color mode -green - supported when terminal is in color mode -yellow - supported when terminal is in color mode -blue - supported when terminal is in color mode -cyan - supported when terminal is in color mode -magenta - supported when terminal is in color mode -down arrow -up arrow -left arrow -right arrow -home key (upward+left arrow) -backspace -delete line -insert line -delete character -insert char or enter insert mode -exit insert char mode -clear screen -clear to end of screen -clear to end of line -scroll one line forward -scroll one line backward -next page -previous page -set tab -clear tab -clear all tabs -soft (partial) reset -reset or hard reset -print -lower left -upper left of keypad -upper right of keypad -center of keypad -lower left of keypad -lower right of keypad -back tab -beginning -cancel -close -cmd (command) -copy -create -end -exit -find -help -mark -message -move -next -open -options -previous -redo -ref (reference) -refresh -replace -restart -resume -save -shiftet beg (beginning) -shifted cancel -shifted command -shifted copy -shifted create -shifted delete char -shifted delete line -select -shifted end -shifted end of line -shifted exit -shifted find -shifted help -shifted home -shifted input -shifted left arrow -shifted message -shifted move -shifted next -shifted options -shifted previous -shifted print -shifted redo -shifted replace -shifted right arrow -shifted resume -shifted save -shifted suspend -undo -mouse event has occurred -maximum key value -ctrl pressed during click -shift pressed during click -alt pressed during click -report all mouse events -report mouse position -XMLReader::ENTITY_REF ( integer ) -Document Type node -Document Fragment node -Notation node -Whitespace node -Significant Whitespace node -End Element -End Entity -XML Declaration node - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1 -2 -3 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Use compression protocol +Allow space after function names +Allow interactive_timeout seconds (instead of wait_timeout) of inactivity before closing the connection. +Use SSL encryption. This flag is only available with version 4.x of the MySQL client library or newer. Version 3.23.x is bundled both with PHP 4 and Windows binaries of PHP 5. +Columns are returned into the array having the fieldname as the array index. +Columns are returned into the array having both a numerical index and the fieldname as the array index. +Columns are returned into the array having a numerical index to the fields. This index starts with 0, the first field in the result. + + + + @@ -6251,53 +4610,201 @@ - - - - -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -1 -2 -3 -4 -5 -7 -8 -9 -10 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +string +string +integer +integer + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + @@ -6527,4 +5034,1600 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +KRB5_KDB_DISALLOW_FORWARDABLE +KRB5_KDB_DISALLOW_RENEWABLE +KRB5_KDB_DISALLOW_DUP_SKEY +KRB5_KDB_REQUIRES_PRE_AUTH +KRB5_KDB_REQUIRES_PWCHANGE +KRB5_KDB_PWCHANGE_SERVER +KRB5_KDB_NEW_PRINC +long +long +long +long +long +long +string +long +long +string +long +long +long +long +long +long + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +integer +integer +integer +integer +integer + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Some value which can be obtained with fstat(1) changed for a file or directory. +A file or directory was deleted or renamed. +A file was created in a directory. +This event never occurs. +An event in response to fam_cancel_monitor . +An event upon request to monitor a file or directory. When a directory is monitored, an event for that directory and every file contained in that directory is issued. + + + + + + + + + + + + + + + + + + + + +1 +2 +4 +8 +16 +32 +64 +128 +256 +example: 1.0.2-dev + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +XMLReader::ENTITY_REF ( integer ) +Document Type node +Document Fragment node +Notation node +Whitespace node +Significant Whitespace node +End Element +End Entity +XML Declaration node +Character data with fixed length +Date, number of days since 1.1.0000 +Short integer (2 Bytes) +Long integer (4 Bytes) +same as PX_FIELD_NUMBER +Double +Boolean +Binary large object +Binary large object (not supported) +Binary large object +OLE object (basically a blob, not supported) +Graphic (basically a blob, not supported) +time, number of milli seconds since midnight +timestamp, number of milli seconds since 1.1.0000 +Auto incrementing interger (like PX_FIELD_LONG) +Decimal number stored in bcd format (not supported) +Array of Bytes with not more than 255 bytes (not supported) +Turn all field names into lower case +Turn all field names into upper case +Indexed database +Primary index +None indexed database +None incremental secondary index +Secondary index +Incremental secondary index +Non incremental secondary index +Secondary index +Non incremental secondary index + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +The component name used to initialise the SQLDBC runtime environment. +The application to be connected to the database. +The version of the application. +The SQL mode. +TRUE, if the connection is an unicode (UCS2) client or FALSE, if not. +The maximum allowed time of inactivity after which the connection to the database is closed by the system. +Specifies whether and how shared locks and exclusive locks are implicitly requested or released. +The number of different request packets used for the connection. +The number of prepared statements to be cached for the connection for re-use. +The prefix to use for result tables that are automatically named. +Columns are returned into the array having the fieldname as the array index. +Columns are returned into the array having the upper case fieldname as the array index. +Columns are returned into the array having the lower case fieldname as the array index. +Columns are returned into the array having both a numerical index and the fieldname as the array index. +Columns are returned into the array having a numerical index to the fields. This index starts with 0, the first field in the result. + + + + + + + + + + +TIDY_TAG_A +TIDY_TAG_ACRONYM +TIDY_TAG_APPLET +TIDY_TAG_B +TIDY_TAG_BASEFONT +TIDY_TAG_BGSOUND +TIDY_TAG_BLINK +TIDY_TAG_BODY +TIDY_TAG_BUTTON +TIDY_TAG_CENTER +TIDY_TAG_CODE +TIDY_TAG_COLGROUP +TIDY_TAG_DD +TIDY_TAG_DFN +TIDY_TAG_DIV +TIDY_TAG_DT +TIDY_TAG_EMBED +TIDY_TAG_FONT +TIDY_TAG_FRAME +TIDY_TAG_H1 +TIDY_TAG_H3 +TIDY_TAG_H5 +TIDY_TAG_HEAD +TIDY_TAG_HTML +TIDY_TAG_IFRAME +TIDY_TAG_IMG +TIDY_TAG_INS +TIDY_TAG_KBD +TIDY_TAG_LABEL +TIDY_TAG_LEGEND +TIDY_TAG_LINK +TIDY_TAG_MAP +TIDY_TAG_MENU +TIDY_TAG_MULTICOL +TIDY_TAG_NOEMBED +TIDY_TAG_NOLAYER +TIDY_TAG_NOSCRIPT +TIDY_TAG_OL +TIDY_TAG_OPTION +TIDY_TAG_PARAM +TIDY_TAG_PRE +TIDY_TAG_RP +TIDY_TAG_RTC +TIDY_TAG_S +TIDY_TAG_SCRIPT +TIDY_TAG_SERVER +TIDY_TAG_SMALL +TIDY_TAG_SPAN +TIDY_TAG_STRONG +TIDY_TAG_SUB +TIDY_TAG_TBODY +TIDY_TAG_TEXTAREA +TIDY_TAG_TH +TIDY_TAG_TITLE +TIDY_TAG_TR +TIDY_TAG_U +TIDY_TAG_VAR +TIDY_TAG_XMP +TIDY_ATTR_ABBR +TIDY_ATTR_ACCEPT_CHARSET +TIDY_ATTR_ACTION +TIDY_ATTR_ALIGN +TIDY_ATTR_ALT +TIDY_ATTR_AXIS +TIDY_ATTR_BGCOLOR +TIDY_ATTR_BORDER +TIDY_ATTR_BOTTOMMARGIN +TIDY_ATTR_CELLSPACING +TIDY_ATTR_CHAROFF +TIDY_ATTR_CHECKED +TIDY_ATTR_CLASS +TIDY_ATTR_CLEAR +TIDY_ATTR_CODEBASE +TIDY_ATTR_COLOR +TIDY_ATTR_COLSPAN +TIDY_ATTR_CONTENT +TIDY_ATTR_DATA +TIDY_ATTR_DATAPAGESIZE +TIDY_ATTR_DATETIME +TIDY_ATTR_DEFER +TIDY_ATTR_DISABLED +TIDY_ATTR_ENCTYPE +TIDY_ATTR_FOR +TIDY_ATTR_FRAMEBORDER +TIDY_ATTR_GRIDX +TIDY_ATTR_HEADERS +TIDY_ATTR_HREF +TIDY_ATTR_HSPACE +TIDY_ATTR_ID +TIDY_ATTR_LABEL +TIDY_ATTR_LANGUAGE +TIDY_ATTR_LAST_VISIT +TIDY_ATTR_LINK +TIDY_ATTR_LOWSRC +TIDY_ATTR_MARGINWIDTH +TIDY_ATTR_MEDIA +TIDY_ATTR_MULTIPLE +TIDY_ATTR_NOHREF +TIDY_ATTR_NOSHADE +TIDY_ATTR_OBJECT +TIDY_ATTR_PROMPT +TIDY_ATTR_READONLY +TIDY_ATTR_REV +TIDY_ATTR_ROWS +TIDY_ATTR_RULES +TIDY_ATTR_SCOPE +TIDY_ATTR_SELECTED +TIDY_ATTR_SHOWGRID +TIDY_ATTR_SHOWGRIDY +TIDY_ATTR_SPAN +TIDY_ATTR_STANDBY +TIDY_ATTR_STYLE +TIDY_ATTR_TABINDEX +TIDY_ATTR_TEXT +TIDY_ATTR_TOPMARGIN +TIDY_ATTR_USEMAP +TIDY_ATTR_VALUE +TIDY_ATTR_VERSION +TIDY_ATTR_VSPACE +TIDY_ATTR_WRAP +TIDY_ATTR_XML_SPACE +constant +root node +doctype +HTML comment +Processing Instruction +Text +start tag +end tag +empty tag +CDATA +XML section +ASP code +JSTE code +PHP code +XML declaration +hotkey defined by newt_form_add_hot_key was pressed +some component has caused form to exit +file descriptor specified in newt_form_watch_fd is ready to be read or written to +time specified in newt_form_set_timer has elapsed + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Exit form, when component is activated +Component is hidden +Component is scrollable +Component is disabled + +Wrap text +Don't exit form on pressing F12 + +Component is selected +Component is checkbox +Entry component is password entry +Show cursor + + + + + + + + + + + + + + +Wrap text in the textbox +Scroll text in the textbox +Don't exit form on F12 press + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Orders results so that $matches[0] is an array of full pattern matches, $matches[1] is an array of strings matched by the first parenthesized subpattern, and so on. This flag is only used with preg_match_all . +Orders results so that $matches[0] is an array of first set of matches, $matches[1] is an array of second set of matches, and so on. This flag is only used with preg_match_all . +See the description of PREG_SPLIT_OFFSET_CAPTURE . This flag is available since PHP 4.3.0. +This flag tells preg_split to return only non-empty pieces. +This flag tells preg_split to capture parenthesized expression in the delimiter pattern as well. This flag is available since PHP 4.0.5. +If this flag is set, for every occurring match the appendant string offset will also be returned. Note that this changes the return values in an array where every element is an array consisting of the matched string at offset 0 and its string offset within subject at offset 1. This flag is available since PHP 4.3.0 and is only used for preg_split . +Returned by preg_last_error if there were no errors. Available since PHP 5.2.0. +Returned by preg_last_error if there was an internal PCRE error. Available since PHP 5.2.0. +Returned by preg_last_error if <link linkend="ini.pcre.backtrack-limit">backtrack limit was exhausted. Available since PHP 5.2.0. +Returned by preg_last_error if <link linkend="ini.pcre.recursion-limit">recursion limit was exhausted. Available since PHP 5.2.0. +Returned by preg_last_error if the last error was caused by malformed UTF-8 data (only when running a regex in <link linkend="reference.pcre.pattern.modifiers">UTF-8 mode ). Available since PHP 5.2.0. +Returned by preg_last_error if the offset didn't correspond to the begin of a valid UTF-8 code point (only when running a regex in UTF-8 mode ). Available since PHP 5.3.0. +PCRE version and release date (e.g. "7.0 18-Dec-2006"). Available since PHP 5.2.4. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1 +2 +4 +8 +16 +32 +64 +-1 +1 +2 +4 +8 +16 +32 +64 +-1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + \ No newline at end of file